You may have a time schedule but rushing through the various steps in making a window only leads to problems that take more time to fix later on. I can guarantee that everyone will finish what they need to if they just slow down. This is especially true in cutting your glass and in soldering. Rushing through cuts leaves you with pieces that barely resemble the pattern which always makes you lose an amazing amount of time when you get to the grinder. Also, a window can only be soldered at one speed so your options are to either solder at that correct (slow) speed or you can rush through it and spend even longer trying to fix your bad soldering. I often tell people that I can spend an hour soldering a window correctly or a half hour doing it half assed which means that I then have to spend another hour trying to fix it afterwards.
So take your time, do it right, and your windows will bring a smile to everyone's faces including your own.
Speaking of smiling faces, Betty put the finishing touches on her Santa Face Window and the Candy Cane border glass works so wonderfully with this design. We've been seeing a lot of people using this glass and it always looks great, but on a Christmas themed window it is just superb.
Jeannette finished her Monarch Butterfly and the colors are absolutely flawless. The brilliant orange resides in stark contrast against the pitch black body and trim which sets this window off perfectly. Also, note the excellent symmetry that she's achieved.
Next up we have Linda F's Saints Window which is barely wider than a foot across. That small size makes the trim that surrounds the Fleur de Lis somewhat difficult to work with and it's why she only bordered it once in white glass. I will say this though, it's a mighty fine looking window no matter how many borders surround the Fleur De Lis.
Lara started this pair of Scissors a while back and this week she brought it back in to class completed so that I could get a picture of it. As always, she's done beautiful work on this (or is it these? Scissors always confuse me because they're referred to as a pair.
Susan D wanted to work on this 3D Hummingbird Lawn Ornament last week but she had forgotten the pattern at home and for some reason we couldn't find a copy of it in the shop even though I know I had a copy somewhere. Well, this week I scanned the pattern so we'll always have a copy on hand.
Terry's been gone for about a year now but she hasn't stopped making stained glass. This wonderful window was made in a joint effort between Terry and her sister Brenda so that it could be completed in time to be gifted on Christmas day. Well done.
Mary Grace got three more Crystal Hangers finished this week and then began working on her next window. You'll see what that is when she returns next year!
Belinda started her church window early! She told me that it wouldn't get started until next year yet here we are looking at her Church in 2019. I really feel like she's going to have fun making this because she's going to learn a lot of shortcuts while making this window. We'll probably discuss those shortcuts sometime early in the new year as she puts them to task.
And then we have Angie's interpretation of the same design. Angie went with a high contrast color palette and a single border which works just as well as a double border. Great work all around.
Next we have Rowena who started this Mardi Gras Mask Panel. She already has the subject matter completely cut out and almost completely ground as well. There will be beads hanging off of the mask that trail and loop to the bottom and back up again but that isn't visible- yet.
Lara's a lot farther along on her Victorian themed window this week and I love that she's going for a bright, vivid window rather than a subdued one. With just the clear(?) background left to go it's safe to say that Lara is flying through this project.
Susan R has everything ground save for her tray of ice and the oysters that rest on that tray. Once they're ground she can start wrapping her pieces or begin cutting out the background pieces to her Seafood Masterpiece. I can't wait to see what she decides to use for her background.
Jeff is ready for a border on his Flower Scenery Window and all three pieces have joined together into one big scene beautifully. With this so very near to completion I can't wait to see what he'll tackle next.
Cindy would have gotten a border attached to her clear Sun Window but she didn't have a finished size verification from her carpenter. It's never a good idea to finish off a window while only assuming that the size you have is correct because pulling apart a window is HARD work. So Cindy soldered the front of her window this week.
Next we have an action shot of Jeanne soldering her two Cardinals. Once she finishes them as two separate suncatchers she will bend some wires and join everything together into one finished piece that already has people asking for the pattern.
And with the front side of Kerry's Pelican Window all soldered and a good portion of the back side as well, I'd say it's safe to assume that this will indeed be ready to be gifted on Christmas day. And my hat goes off to Kerry for the excellent work he's done on his soldering process. Slow and steady wins the stained glass window race.
Carol's first of two Cross Windows is so very near completion. There's just a little soldering to do on the back side of this one and then she'll move on over to her second window which I think she already has ground and ready for foiling. We'll see both of these Crosses at the top of the blog in our next and final post of the year.
After getting all of the clear water glass background cut out for her Cardinal Sunflower Window Shawn began work on grinding each of her pieces for a perfect fit. She says that she feels as though it will take her forever to grind but I know she's wrong about that. The leaves of the sunflower will go quickly and easily when I give her a demonstration of how to grind them. It's all about moving in a circle.
And here's a look at the text that will reside in the center of Shawn's Sunflower. Stained Glass may be a very old art but now days we get to add some computer assistance which is what makes this curved music center possible
It looks like next week is going to be filled with finished windows! This is the back side of Linda F's large LSU Window and as you can see she has it just about halfway soldered already. That means that we'll see this hanging with light behind it when we return.
Now Mary wasn't supposed to be in class this week but due to unforeseen circumstances Mary wasn't operated on last week which opened her schedule and allowed her to attend our last two classes of the year. After getting her background all cut out of clear water glass Mary moved on to the grinding stage of her latest project. She's working from the top down on this and it's looking so good already.
Melissa has her Peacock's butt all ground wrapped and tacked together! I've said a lot of things in this Blog over the years but never that! She's going to pin this into place and then begin grinding all of the feathers that radiate outward when she comes back to class. It will be somewhat challenging because there are so many pieces but I know Melissa and if anyone is up for this job it's her.
Here we look at MiMi's Cotton Boll Window which got its border cut and tacked into place. The curved corners make this only slightly more involved than a standard border and we cut it as so: First we cut strips on the strip cutter and then joined two straight border pieces on each of the four sides of her window. Then we placed some of the amber glass under the window, traced out the curve and then extended the outer edge until it gave us the completed final piece. MiMi did that for each of her corners and then ground and tacked them into place. Yep, this will be another finished window next week.
Barbara has decided to cut out a Bee Lawn Ornament and what a good job she's done getting this cut out. She doesn't even have this ground yet and it already looks like it fits together. Taking your time while cutting ALWAYS saves you time at the grinder...
And that about does it for our second to last post of the year. 2020 is well on its way to us now!
Paul
Bayou Salé GlassWorks
No comments:
Post a Comment